Premium investments: natural granite
Premium investments: natural granite and technological revolution with GECO 300 PRO
The hydraulic vacuum lifter GECO 300 PRO redefines precision and profitability in granite slab installation for top-tier residential and commercial projects
Why does premium granite require vacuum technology?
Traditional methods of installing large-format granite slabs carry risks that premium projects simply cannot afford
Edge protection
The suction cup grips only the face of the slab. No metal clamps or straps means no chipped edges – the leading cause of costly claims on premium construction sites.
Perfect joints
No straps beneath the material allows slabs to be pushed flush against each other. The millimetre-tight joints demanded in luxury projects become achievable without extra effort.
Zero cracking risk
Large-format granite slabs are vulnerable to sudden contact with metal tools. Vacuum technology transfers weight without any pressure points on the stone structure.
50% faster installation
Using UP GECO equipment cuts installation time by up to half compared to traditional methods. More square metres per day with the same workforce.
GECO 300 PRO – the technological foundation of your investment
100% hydraulically powered – no generator, no cables, no compromises
Purely hydraulic drive
GECO 300 PRO draws power exclusively from the carrier machine's hydraulic circuit. On any site with access to an excavator or mini-excavator, the device is ready to work immediately – no generator, cables or external power supply needed.
Interchangeable suction pads
The device handles both smooth, polished granite slabs and materials with a flamed or bush-hammered surface. Changing suction pads takes minutes and requires no specialist tools.
Works in any conditions
The hydraulic drive provides full independence from weather conditions. Rain, moisture or the absence of a power grid in the early stages of construction never halts installation work.
EN 13155 certified
GECO 300 PRO meets the requirements of European standard EN 13155 for non-permanently attached lifting devices. The documentation required for technical handovers and health & safety audits on premium sites.
How does granite slab installation with GECO 300 PRO work?
Three steps from slab on pallet to perfectly laid surface
Attach the lifter and check the gauge
The operator mounts GECO 300 PRO on the excavator's quick-coupler and connects two hydraulic hoses. The lifter is applied to the slab and the manometer reading is checked – the vacuum value is read and compared with the load table on the suction pad.
Grip and transport
Once the gauge shows a reading in the green zone, the operator lifts the slab and moves it with the machine arm to the target location. One operator in the cab controls the entire process from a safe seated position.
Precise placement and vacuum release
The slab is pushed flush with neighbouring elements to millimetre accuracy – with no straps underneath. Once the slab rests stably on the surface, the operator releases the vacuum. The lifter separates without touching the edges.
Technical specifications GECO 300 PRO
Hydraulic vacuum lifter for excavators and construction machinery
| Technical parameter | Specification | Note |
|---|---|---|
| Maximum lifting capacity | 300 kg | Verify current value in the table on the suction pad |
| Vacuum generated | 45 kPa | Minimum operating vacuum from excavator hydraulics |
| Suction time | 1 second | With correct oil flow rate |
| Power supply | Carrier machine's hydraulic circuit | Min. flow 20 L/min, working pressure 150 bar |
| Max. pressure | 200 bar | Maximum circuit pressure |
| Device weight | 38 kg | Mounted on standard quick-coupler |
| Certification | EN 13155 | European standard for non-permanently attached lifters |
| Operation | 1 operator in machine cab | Full control from seated position |
Economics and return on investment
Advanced equipment is not a cost – it is budget optimisation on every contract
One operator instead of a crew
A single excavator operator is all it takes to lay even the heaviest granite elements. Reduced labour costs directly improve the contract margin.
Faster installation
GECO 300 PRO cuts installation time by up to half compared to traditional methods. More contracts completed in the same working time.
No crane hire
Crane hire costs hundreds of euros per hour plus transport fees. GECO 300 PRO fitted to your own excavator works without any additional charges.
Fewer injuries, fewer stoppages
Eliminating manual lifting removes the risk of back injuries among workers – the leading cause of sick leave on construction sites.
Key safety rules
Follow these rules to maintain full safety and lifter effectiveness
Clean and dry surface
Granite with a wet, dusty or oily surface significantly weakens suction force. Before using the lifter, clean and dry the suction pad contact zone on the slab.
Read the gauge before lifting
Always check the current manometer reading and compare it with the load table printed on the suction pad. This is the only reliable method for verifying safe load in real working conditions.
Slab condition
Do not lift slabs with visible cracks or chipped edges. Even perfect vacuum grip cannot compensate for the weakened structure of a damaged element.
Machine hydraulic parameters
Ensure the excavator or mini-excavator provides a minimum flow of 20 L/min and a working pressure of 150 bar. Insufficient hydraulic parameters reduce lifter effectiveness and working safety.
During transport and laying, no person may stand under a raised granite slab. Before releasing the vacuum, ensure the element rests stably on the target surface.
Every suction pad on a GECO lifter has a printed load table as a function of achieved vacuum. Read the current value from the manometer and compare it with the table – the only reliable method for verifying safe load in real site conditions.
Order GECO 300 PRO
Hydraulic vacuum lifter for installing premium stone slabs
Hydraulic vacuum lifter GECO 300 PRO
300 kg capacity, 45 kPa vacuum, 1-second suction time. Powered by the excavator's hydraulic circuit – no generator, no cables. EN 13155 certified. Single-operator control from the machine cab.
Frequently asked questions
Answers to questions about GECO 300 PRO for premium granite installation
Deliver your premium investment without compromise
Contact us – we will advise on equipment selection and answer all your questions about granite installation with GECO 300 PRO