Service
We’re taking care of your safety
During servicing, we’ll check all safety components of your unit.
Inspection
Checking the general condition of the Vacuum Paver Life
Quality
Checking the load-bearing components for wear, deformation, and other damage.
| Fault | Cause | Repair tip |
|
The vacuum generator is working, but the load is not being drawn in. |
The filter screen is dirty |
Position the vacuum gripper so that the suction plate is completely |
|
Clean the filtering sieve. |
||
|
MThe 0.25 bar minimum |
The transported load is porous or has cracks and |
This vacuum gripper is not suitable |
|
The sealing edge of the |
Replace the suction plate. |
|
|
Faulty manometer. |
Replace the manometer. |
|
|
Working at altitudes above 1600m.
|
Follow the maximum altitude limits. |
